WARNING: Risk of burning! Work on auxiliary heater may only be carried out when it has cooled down.
Necessary preliminary work:
Removal:
Slacken clamp (1).
Release screw (2) and remove silencer (3).
Installation:
Position silencer (3) correctly.
Tighten down screw (2).
Tighten clamp (1).
Required reworking:
BMW X3 Service & Repair Manual > Brakes: Spindle
Spindle Minimum set: Mechanical tools AM
NOTE: Spindle is an integral part of resetter 83 30 2 320 871 with identification B.
SI number
01 11 12 (807)
TENSIONING STRAP
Tensioning strap Mechanical tool
NOTE: To change the knock sensor controller on the H31 brake system
Storage Lo ...