BMW X3 Service & Repair Manual: Removing and installing/replacing left or right underbody panelling
BMW X3 Service & Repair Manual / Suspension / Control arms and struts / Removing and installing/replacing left or right underbody panelling
Graphic is only an example. There may be differences in specific details depending on engine version.
Unscrew all bolts.
Remove underbody panelling (1).
Installation note: Make sure underbody panelling (1) is correctly seated.
Removing and installing/replacing left or right toe arm
IMPORTANT:
The toe link must be installed with the opening (U-section) facing downward!
If the toe link is bent, the control arm/wheel ...
Replacing a ball joint in lower steering stub/wheel carrier
Special tools required:
0 496 553
2 293 777
2 293 775
2 293 776
0 496 554
Necessary preliminary tasks:
Remove CAMBER ARM.
Remove ...
Other materials:
BMW X3 Service & Repair Manual > Ignition coil: Replacing ignition coils (N20)
Necessary preliminary tasks:
Read out the fault memory of the DME control unit.
Check stored fault messages and process procedure.
Switch off ignition.
Remove ACOUSTIC COVER
IMPORTANT:
Ignition coils must not be contaminated by fuel.
The resistance of the silicone material is r ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
© 2017-2023 Copyright www.bmwx3tech.com - 0.0731