Mandrel Mechanical tool
NOTE: (Drift) For driving the radial seal ring out of the bearing bush of the rack-and- pinion hydraulic steering
Storage Location
C16
SI number
01 05 95 (932)
Mandrel Mechanical tool
NOTE: (Drift) for radial sealing ring in the valve body/steering box
Storage Location
X8
Mandrel Mechanical tool
NOTE: (Drift) Drift for for driving in steering shaft guide bearing on E46 (new steering box). Series introduction 1998.
Storage Location
B16
SI number
01 02 98 (302)
Mandrel Mechanical tool
NOTE: (Drift) For driving out radial shaft seal in cylinder barrel
Storage Location
X8
Mandrel Mechanical tool
NOTE: (Drift) For fitting the radial seal in the transmission housing of rack-and-pinion steering
Storage Location
A15
Mandrel Mechanical tool
NOTE: (Drift) For driving the radial seal ring into the bearing bush (steering shaft) on the rack-and-pinion hydraulic steering
Storage Location
C16
SI number
01 05 95 (932)
Mandrel Mechanical tool
NOTE: (drift) For fitting the radial sealing ring in the steering spindle housing of the rack and pinion power steering unit
Storage Location
C16
SI number
01 05 95 (932)
Mandrel Mechanical tool
NOTE: (Drift) For driving radial shaft seal into bearing bush of rack and pinion power steering unit
Storage Location
C16
SI number
01 05 95 (932)
Mandrel Mechanical tool
NOTE: (drift) For driving out the radial sealing ring in the cylinder barrel, inside and outside
Storage Location
X8
Mandrel AM
Mandrel Mechanical tool
NOTE: (drift) For radial sealing ring of the power steering
Storage Location
C16
Mandrel Mechanical tool
NOTE: (Drift) For driving in steering spindle bearing.
Storage Location
B20
SI number
01 11 06 (265)
Mandrel Mechanical tool
NOTE: (Drift) For roller bearing in the valve body of rack-and-pinion steering
Storage Location
X8
Mandrel Mechanical tool
NOTE: (Drift) For radial seal ring of inner steering sector shaft in steering box
Storage Location
A15
MEASURING DEVICE
Measuring device Minimum set: Mechanical tools AM
NOTE: (Sensor) Deletion, only available via tool set
NUT
Nut AM
NOTE: (Thrust nut)
BMW X3 Service & Repair Manual > Final drive with cover: Replacing rear cover gasket on rear differential (188lw)
WARNING: DANGER OF POISONING if oil is ingested/absorbed through the skin!
RISK OF INJURY if oil comes into contact with eyes and skin!
IMPORTANT:
In event of oil loss, always check rear differential for traces of wear and damage.
To avoid leaks from the rear differential cover, do not us ...