BMW X3 Service & Repair Manual: Open-end wrench
Open-end wrench Mechanical tool
NOTE: (open-end wrench WAF 32) For adjusting telescopic spindle sliding force
Storage Location
Y3
Open-end wrench AM
NOTE: (Open-end spanner AF 22)
Open-end wrench Mechanical tool
NOTE: (open-end wrench WAF 27) For adjusting left track rod on rack
Storage Location
Y4
Open-end wrench AM
NOTE: (Open-end spanner AF 22) with inner reducer 1/2" - outer 3/8"
Consisting of:
1. Open-end wrench
NOTE: (Open-end spanner AF 22)
2. Adapter
NOTE: (Adapter) inner 1/2" - outer 3/8"
Open-end wrench insert Mechanical tool
NOTE: (open-end wrench insert WAF 32) For screwing track rod to rack
Storage Location
A11
Open-end wrench insert Mechanical tool
NOTE: (Open-end wrench insert) SW34 For releasing and tightening down track rod connection to steering gear (rack)
Storage Location
A84
SI number
01 01 04 (065)
Mandrel
Mandrel Mechanical tool
NOTE:
(Drift) For driving the radial seal ring out of the bearing bush of the rack-and-
pinion hydraulic steering
Storage ...
Outpusher
Outpusher Mechanical tool
NOTE: For removing the track rod ball joints from the drop arm and track-rod arm
Storage Location
C11
Outpusher Mechan ...
Other materials:
BMW X3 Service & Repair Manual > Troubleshooting: Notes for disconnecting and connecting battery
Observe SAFETY INFORMATIONS FOR HANDLING VEHICLE BATTERY .
Before disconnecting battery:
Turn off the ignition and other electrical loads/consumers to prevent sparking when reconnecting.
NOTE:
If the ignition is not turned off when the battery is disconnected, fault memories
may be set in so ...