BMW X3 Service & Repair Manual: Outpusher
Outpusher Mechanical tool
NOTE: For removing the track rod ball joints from the drop arm and track-rod arm
Storage Location
C11
Outpusher Mechanical tool
NOTE: For pressing out the track rod center section from the drop arm and track-rod arm. Model: All except 520, 525
Outpusher Minimum set: Mechanical tools Mechanical tool
NOTE: For pressing out the conical seats from the track rod ball joints
Storage Location
A12
SI number
01 06 94 (801)
Outpusher Mechanical tool
NOTE: For pressing out the track rod middle section from the drop arm and track-rod arm
Storage Location
A12
Outpusher Mechanical tool
NOTE: For pressing out the side and middle track rod ball joints
Storage Location
Y6
Open-end wrench
Open-end wrench Mechanical tool
NOTE: (open-end wrench WAF 32) For adjusting telescopic spindle sliding force
Storage Location
Y3
Open-end wrenc ...
Pin wrench
Pin wrench Mechanical tool
NOTE: For releasing and tightening the nut on the cylinder barrel of the rack-and-
pinion steering
Storage Location
Y3
...
Other materials:
BMW X3 Service & Repair Manual > Transfer box: Replacing output flange on rear transfer box (atc 45l)
IMPORTANT:
After completing work, check TRANSMISSION OIL LEVEL and top up if necessary.
Use only the approved TRANSMISSION OIL .
NOTE:
Replace output flange only together with a new radial shaft seal.
Procedure for removing output flange is identical to replacing RADIAL
SHAFT SEAL.
...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
