BMW X3 (F25) Service & Repair Manual: Engine mounting

BMW X3 (F25) Service & Repair Manual / Transmission / Engine mounting

Replacing left engine mount (N20)

Necessary preliminary tasks:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N47)

Necessary preliminary tasks:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N52)

Necessary preliminary work:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine mount (N55)

Necessary preliminary work:

  • Remove LEFT ENGINE SUPPORT ARM.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing left engine support arm (N20)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION
  • Remove rear UNDERBODY PROTECTION ASSEMBLY
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screws (1).

Remove engine support arm.

Transmission

Replacing left engine support arm (N47)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION .
  • Remove GUIDE TUBE of dip stick.
  • Remove rear underbody protection.
  • Partially detaching the front left wheel arch panel.

Release screws (1).

Remove engine support arm.

Transmission

Replacing left engine support arm (N52)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove THROTTLE BODY
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screw (1).

Unfasten screws (2).

Remove engine support arm.

Transmission

Replacing left engine support arm (N55)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove left CHARGE AIR DUCT
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE
  • Partially detach wheel arch trim panel on rear left

Release screw (1).

Unfasten screws (2).

Remove engine support arm.

Transmission

Replacing right engine mount (N20)

Necessary preliminary tasks:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N47)

Necessary preliminary tasks:

  • REMOVE right engine support arm.

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N52)

Necessary preliminary work:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine mount (N55)

Necessary preliminary work:

  • Remove RIGHT ENGINE SUPPORT ARM

Release screws (1) and remove engine mount (2).

Transmission

Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.

Transmission

Replacing right engine support arm (N20)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION
  • Remove the REAR UNDERBODY PROTECTION
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N47)

Necessary preliminary tasks:

  • Secure engine in INSTALLATION POSITION .
  • Remove REINFORCEMENT PLATE .

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N52)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Replacing right engine support arm (N55)

Necessary preliminary work:

  • Secure engine in INSTALLATION POSITION
  • Remove rear underguard
  • Remove REINFORCEMENT PLATE

Release screws (1).

Remove engine support arm.

Transmission

Tire mounting paste
1.0 TIRE MOUNTING PASTE Use only a lubricant specifically designed for this purpose (former BMW Part No. 81 22 9 407 288). Wurth Tire Mounting Pas ...

Transmission suspension, automatic. transmission
...

Other materials:

BMW X3 (F25) Owners Manual > At a glance: Integrated Owner's Manual in the vehicle
Vehicle features and options This chapter describes all standard, country-specific and optional features offered with the series. It also describes features that are not necessarily available in your car, e. g., due to the selected options or country versions. This also applies to safety-relat ...