BMW X3 (F25) Service & Repair Manual: Engine mounting
- Replacing left engine mount (N20)
- Replacing left engine mount (N47)
- Replacing left engine mount (N52)
- Replacing left engine mount (N55)
- Replacing left engine support arm (N20)
- Replacing left engine support arm (N47)
- Replacing left engine support arm (N52)
- Replacing left engine support arm (N55)
- Replacing right engine mount (N20)
- Replacing right engine mount (N47)
- Replacing right engine mount (N52)
- Replacing right engine mount (N55)
- Replacing right engine support arm (N20)
- Replacing right engine support arm (N47)
- Replacing right engine support arm (N52)
- Replacing right engine support arm (N55)
Replacing left engine mount (N20)
Necessary preliminary tasks:
- Remove LEFT ENGINE SUPPORT ARM.
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing left engine mount (N47)
Necessary preliminary tasks:
- Remove LEFT ENGINE SUPPORT ARM.
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing left engine mount (N52)
Necessary preliminary work:
- Remove LEFT ENGINE SUPPORT ARM.
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing left engine mount (N55)
Necessary preliminary work:
- Remove LEFT ENGINE SUPPORT ARM.
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing left engine support arm (N20)
Necessary preliminary tasks:
- Secure engine in INSTALLATION POSITION
- Remove rear UNDERBODY PROTECTION ASSEMBLY
- Remove REINFORCEMENT PLATE
- Partially detach wheel arch trim panel on rear left
Release screws (1).
Remove engine support arm.
Replacing left engine support arm (N47)
Necessary preliminary tasks:
- Secure engine in INSTALLATION POSITION .
- Remove GUIDE TUBE of dip stick.
- Remove rear underbody protection.
- Partially detaching the front left wheel arch panel.
Release screws (1).
Remove engine support arm.
Replacing left engine support arm (N52)
Necessary preliminary work:
- Secure engine in INSTALLATION POSITION
- Remove THROTTLE BODY
- Remove rear underguard
- Remove REINFORCEMENT PLATE
- Partially detach wheel arch trim panel on rear left
Release screw (1).
Unfasten screws (2).
Remove engine support arm.
Replacing left engine support arm (N55)
Necessary preliminary work:
- Secure engine in INSTALLATION POSITION
- Remove left CHARGE AIR DUCT
- Remove rear underguard
- Remove REINFORCEMENT PLATE
- Partially detach wheel arch trim panel on rear left
Release screw (1).
Unfasten screws (2).
Remove engine support arm.
Replacing right engine mount (N20)
Necessary preliminary tasks:
- Remove RIGHT ENGINE SUPPORT ARM
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing right engine mount (N47)
Necessary preliminary tasks:
- REMOVE right engine support arm.
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing right engine mount (N52)
Necessary preliminary work:
- Remove RIGHT ENGINE SUPPORT ARM
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing right engine mount (N55)
Necessary preliminary work:
- Remove RIGHT ENGINE SUPPORT ARM
Release screws (1) and remove engine mount (2).
Installation note: Rubber buffer (1) on engine mount must point towards center of vehicle.
Replacing right engine support arm (N20)
Necessary preliminary tasks:
- Secure engine in INSTALLATION POSITION
- Remove the REAR UNDERBODY PROTECTION
- Remove REINFORCEMENT PLATE
Release screws (1).
Remove engine support arm.
Replacing right engine support arm (N47)
Necessary preliminary tasks:
- Secure engine in INSTALLATION POSITION .
- Remove REINFORCEMENT PLATE .
Release screws (1).
Remove engine support arm.
Replacing right engine support arm (N52)
Necessary preliminary work:
- Secure engine in INSTALLATION POSITION
- Remove rear underguard
- Remove REINFORCEMENT PLATE
Release screws (1).
Remove engine support arm.
Replacing right engine support arm (N55)
Necessary preliminary work:
- Secure engine in INSTALLATION POSITION
- Remove rear underguard
- Remove REINFORCEMENT PLATE
Release screws (1).
Remove engine support arm.
Tire mounting paste
1.0 TIRE MOUNTING PASTE
Use only a lubricant specifically designed for this purpose (former BMW Part No. 81 22 9 407 288).
Wurth Tire Mounting Pas ...
Other materials:
BMW X3 (F25) Service & Repair Manual > Transmission: Oil pump
REPLACING TORQUE CONVERTER RADIAL SHAFT SEAL (GA8HP45Z)
Special tools required:
00 1 450
13 5 250
24 0 200
24 1 420
24 2 410
24 1 410
IMPORTANT:
Do not let skin come in contact with transmission oil and do not inhale transmission oil
vapors.
Wear protective glov ...