BMW X3 Service & Repair Manual: Tool set

Tool set Mechanical tool

NOTE: Retrofit - for authorised BMW dealers who have already received the special tool 31 0 000 from SPX

SI number

01 19 10 (674)

Driveline+Axles

Tool set AM

Driveline+Axles

NOTE: Threaded spindle set for removing and installing the rubber mount on the rear axle support.

SI number

08 06 10 (658)

Consisting of:

4 = 2208574

3 = 2208575

Tool set AM

Driveline+Axles

NOTE: Adapter kit 2 (BMW), (BMW-specific adapters), for installation and removal of wheel bearings, propeller shafts and drive shafts.

SI number

08 12 14 (155)

Consisting of:

1 = 2159721

14 = 2159722

18 = 2156282

17 = 2156283

2 = 2159723

16 = 2156275

15 = 2156273

13 = 2156280

12 = 2156279

11 = 2156278

10 = 2156277

Tool set AM

Driveline+Axles

NOTE: A set of the BMW hydraulic tool system for wheel bearings and output shafts (basic set for BMW, consisting of 81 64 2 155 744, 81 64 2 155 745, 81 64 2 155 746)

SI number

08 12 14 (155)

Tool set AM

Driveline+Axles

NOTE: Hydraulic unit (basic unit) for removal and installation of wheel bearings, propeller shafts and drive flanges.

SI number

08 12 14 (155)

Consisting of:

2 = 2156247

1 = 2156246

Tool set Minimum set: Mechanical tools AM

Driveline+Axles

In conjunction with: 2357190

NOTE: For positioning the support bearing on the spring strut of the front axle Fitting aid that replaces (blocked) tool 31 0 000

SI number

01 19 10 (674)

Consisting of:

1 = Gauge

NOTE: For positioning the support bearing.

2 = Battery

NOTE: commercially available battery 3V lithium (CR 123A)

3 = Locating fixture

NOTE: For attaching and aligning the laser on the spring strut.

4 = Laser

5 = Mirrors

NOTE: 1 set (2 units) replacement for prism 83 30 2 210 780

7 = Measurement aid

NOTE: Prism with mirror, for aligning the laser beam.

Tool set AM

Driveline+Axles

NOTE: Wheel bearing adapter kit 1 (BMW), (spindles and tensioning nuts) for removal and installation of wheel bearings, propeller shafts and drive flanges.

SI number

08 12 14 (155)

Consisting of:

15 = 2156262

14 = 2159720

13 = 2156257

12 = 2156256

11 = 2318476

10 = 2159986

9 = 2159985

1 = 2156252

2 = 2156253

3 = 2156254

4 = 2156255

5 = 2156258

6 = 2156260

7 = 2156265

8 = 2156271

16 = 2156270

    Tool
    Tool Mechanical tool NOTE: Clamping plate As of 08/2011, the previous special tool 31 3 353 receives this new item number SI number 01 16 ...

    Washer
    Washer AM NOTE: (Flanged washer) For centring of threaded spindle and as a support disc for removing and installing the rubber mount in the f ...

    Other materials:

    BMW X3 Service & Repair Manual > Transmission shafts: Replacing output flange on transfer box at rear (atc450)
    IMPORTANT: After completing work, check transmission oil level and top up if necessary. Use only the approved TRANSMISSION OIL . NOTE: Replace output flange only together with a new radial shaft seal. Operations for removing output flange are identical to replacing RADIAL SHAF ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0309