WARNING: Danger of injury! Before beginning work, position table lift with the lower frame securely on the floor.
Danger area around mechanism below platform.
Follow the operating instructions from the equipment manufacturer.
The mobile table lift is used for collision repairs and when removing large engines.
Adaptations for mounting front axle with engine and transmission.
Release star knob screw on working plate (B) of table lift; the working surface (B) can be extended by approx. 310 mm.
Release all push-pull clamps and the working plates can be shifted by approx. 20 mm.
Working plate (A and B) can be raised and lowered by 3º on the long side and by 5º on the transverse side.
Working plate (A and B) is subdivided by a coordinate system and a possible installation position is recommended in the respective repair manual.
IMPORTANT: Follow the operating instructions from the equipment manufacturer.
BMW X3 Service & Repair Manual > Starter lead: Replacing positive battery cable between starter motor, alternator and
positive battery connection point (N55)
Necessary preliminary work:
Read out the fault memory of the DME control unit.
Switch off ignition.
Disconnect BATTERY EARTH LEAD .
REMOVE intake plenum.
Fold back cover (1).
Release nut underneath. Remove positive battery cable from battery positive terminal.
Remove protective ca ...